Home Krone Forage Wagons Self Loading Wagons

MX 370 GL

Enquire Now

Loading and forage transport wagon‌ Volumetric capacity according to DIN 11741 37 m³ Total length: 9,290 mm Total width: 2,900 - 2,980 mm Total height: 3,820 - 3,950 mm Track: 2,050 mm PTO speed 1,000 rpm Power requirement approx. 103 kw (140 hp)

Download Brochure Enquire Now

200580020

Self Loading Wagons

Description

Hitch‌
Hydraulic lifting drawbar
Hydraulic drawbar suspension (810)
Driveshaft with wide angle joint on one end, 1 3/8", Z=6 incl. overload clutch
Hydraulic system Load Sensing as well as to operate with pressure circulation
​Pick-up‌
Crop press roller unit
Lateral pick-up suspension
​Camless pick-up EasyFlow‌ (work width 1,800 mm according to DIN 11220), with 5 rows of tines (tines spaced 55 mm
apart), pivoting guide wheels 16x6.50-8
​Cut-and-feed rotor‌
Optimized rotor drive with oversized spur gear
Power-saving cut-and-feed unit with 8 rows of tines plated with wear-resistent ​Hardox steel‌
1.595 mm feed channel width ensures optimum filling level of the loading area
Cut-and-feed unit  41 knives, segmental switchable with central adjustment (0 / 20 / 21 / 41)
Power-saving ​precision scissor-type cutting‌, 37 mm / 74 mm (half set of knives)
Individual knife protection (knife protection sensitivity adjustable to crop conditions)
Automatic reset of the activated knives
For maintenance purpose ​left-side pivoting blade cassette‌, unlocking controllable from the side of the wagon
​Loading area‌
Pivoting front wall
Basic automatic loading
​Lower floor conveyor‌ and therefore shortened feed channel area ensures fuel-saving operation and special crop protection as well as optimum filling of the loading
Double floor conveyor with ​4 round steel conveyor chains ‌
Hydraulic scraper conveyor drive on both sides
Reversing valve for ​2 floor conveyor Speeds‌ (rapid traverse)
Pivoting front wall with large angle increases load volume and eases discharge
Solid steel extensions with vertically straight side wall (incl. LED working light for the load area lighting)
Wide hatch with folding stepladder and handgrip
Hydraulic tailgate incl. aperture sensor and scraper conveyor switch-off
​Further equipment‌
Comfort on-board electronic 1.0 ISOBUS-compatible, without operation unit (When the tractor is ISOBUS-incompatible, B290
is additionnally required! If no ISOBUS terminal available, aditionnally select B411, B412, B413 or B308) (3011).
Bottom-mount attachment with ball hitch 80 (4,000 kg tongue load) and caster-steer axle included (0655)
Load area height increase included (1320)

Enquiry

In order to assist us in reducing spam, please type the characters you see:

You may also like