Home Krone Square Balers BigPack Gen 4 - Non Cutter

BiG Pack 890 (Gen 4)

Enquire Now

Large square baler‌ Length 7,950 mm (transport position), height 3,140 mm Width: Depending on the tyres / pick-up (width with variant 0860: 2.995 mm) Bales = height 0.90 m, width 0.80 m, length 1.00 - 2.70 m 49 piston strokes per minute Power requirement as from 80 kW (109 HP)

Download Brochure Enquire Now

BigPack Gen 4 - Non Cutter


Bottom or top hitching drawbar (Note: The hitch ring is not included and must be chosen separately)
Parking jack
Hydraulic system Load Sensing as well as to operate with pressure circulation
​Feed system‌
​KRONE VFS (Variable Filling System)‌ for complete filling of the bale chamber
Protected via cam clutch - no shear pins
​Bale channel / plunger‌
Long conical bale channel for the best bale shape
Automatic baling force control
Electric bale length adjustment (1220)
Big fly wheel weighing around ​254 kg‌
Main drive-line by gears, no chains, no shear pins
4 double knoters (1320)
Folding, dust-proof twine box, twine ball capacity 32 rolls
LED working lights for needles, twine boxes, knotters
​Further equipment‌
Automatic central lubrication unit (incl. packer) (1140)
Medium on-board electronic 1.0 ISOBUS-compatible, without operation unit(when the tractor is ISOBUS-incompatible, B290 is additionally
required! If no ISOBUS terminal available, aditionnally select B412, B413 or B308.) (0967)
Tyres 710/45-22.5 162 A8 (only with single axle, width (with variant 0850) 2.600 mm) included (0325)
Driveshaft with wide angle joint on one end, 1 3/8“, Z=6 included (1410)
Active pick-up: Camless pick-up with actively driven feed roller for optimum crop flow under all conditions, crop press roller unit and pivoting guide wheels, 55 mm tine distance (working width 2,350 mm according to DIN 11220 included (0860)
Roller chute with bale ejector included (0725)


In order to assist us in reducing spam, please type the characters you see:

You may also like