Home Krone Square Balers BiGPack Gen 5 - With cutting system

BiG Pack 1290 HDP VC

Enquire Now

Large square baler with cutting system VC‌ Length 8,850 mm (transport position), 9,725 mm (with PreChop), width 2 ,995, height 3,455 mm Bales = height 0.90 m, width 1.20 m, length 1.00 - 3.20 m 45 piston strokes per minute Power requirement as from 180 kW (245 HP)

Download Brochure Enquire Now

BiGPack Gen 5 - With cutting system

Description

Hitch:‌
Bottom or top hitching drawbar (Note: Hitch ring, driveshaft and stand are mandatory!)
Hydraulic system is Load Sensing capable and can be used as pressureless circulating system
​Pick-up‌
Crop press roller unit
Active pick-up – camless pick-up EasyFlow with actively driven feed roller (0850)
2,350 mm working width according to DIN 11220, with five rows of tines, tines spaced 55 mm apart
16x6.50-8 castor-mounted guide wheels
​Cutterbar‌
Rotor cutting unit VariCut (VC), blade group control system
Single blade locking device
Blade cassette can be pulled out to the side
​Feed system‌
Updated KRONE VFS (Variable Fill System), terminal-based control
Protected via cam clutch - no shear pins
​Bale channel / plunger‌
HDP bale channel
Bale channel equipped with changeable wear plates
Wider chamber top plate
Automatic baling force control
Electric bale length adjustment
Big flywheel weighing around ​610 kg‌
Main drive-line by gears, no chains, no shear pins
Deselectable pusher dogs
​Knotter‌
6 double knotters (1320)
Sealed twine boxes for 30-15kg twine rolls, hydraulic control
LED working lights for needles, twine boxes, knotters
​Further equipment‌
Tandem axle, steered, 14 t. (0241)
Cleaning system KRONE PowerClean (1045)
Mudguards are standard-fit
Standard-fit rear bracket for easy mounting of optional twine boxes or silage additive tank
Automatic central lubrication unit (incl. packer)
Comfort on-board electronics 1.0 ISOBUS-compatible, without operating terminal (if the tractor is not ISOBUS-compatible
B290 is required additionnally: if no ISOBUS terminal available B412, B413 or B308 is required additionnally) (3011)
KRONE SmartConnect ready
Cutting system VariCut with 26 knives included (0625)
Tandem axle steered, 14 t. (0241)
Air pressure brake included (0510)
Tyres 500/60 R 22.5 included (0355)
Roller chute included (0720)

Enquiry

In order to assist us in reducing spam, please type the characters you see:

You may also like