Home Krone Square Balers BiGPack Gen 4 - with cutting system

BiG Pack 870 HDP X (Gen 4)

Enquire Now

Large square baler with cutting system‌ Length 7,950 mm (transport position), height 2,960 mm Width: Depending on the tyres / pick-up (width with variant 0860: 2.995 mm) Bales = height 0.70 m, width 0.80 m, length 0.50 - 2.70 m 49 piston strokes per minute Power requirement as from 120 kW (163 HP)

Download Brochure Enquire Now

BiGPack Gen 4 - with cutting system

Description

Hitch:‌
Bottom or top hitching drawbar (Note: The hitch ring is not included and must be chosen separately)
Parking jack
Hydraulic system Load Sensing as well as to operate with pressure circulation
​Cutterbar‌
Rotor cutting unit XC with 16 blades, group blade control system (8/8) (0660)
Single blade locking device
Two lateral pull-out blade cassettes
​Feed system‌
​KRONE VFS (Variable Filling System)‌ for complete filling of the bale chamber
Protected via cam clutch - no shear pins
​Bale channel / plunger‌
Long conical bale channel for the best bale shape
Automatic baling force control
Electric bale length adjustment (1220)
Big fly wheel weighing around ​450 kg‌
Main drive-line by gears, no chains, no shear pins
​Knotter‌
Multibale system incl. five double knotters (1350)
Folding, dust-proof twine box, twine ball capacity 32 rolls
LED working lights for needles, twine boxes, knotters
​Further equipment‌
Comfort on-board electronics 1.0 ISOBUS-compatible, without operating terminal (if the tractor is not ISOBUS-compatible
B290 is required additionnally: if no ISOBUS terminal available B412, B413 or B308 is required additionnally) (0977)
Preparation for KRONE Diagnostics with Comfort on-board electronic 1.0 (3011)
Automatic central lubrication unit (incl. packer) (1140)
Tandem axle, fixed, hydraulic brake included (0250)
Tyres 550/45-22.5 16PR (with variant 0850: width 2.600 mm) included (0385)
Driveshaft with wide angle joint on one end, 1 3/8“, Z=6 included (1410)
Active pick-up: Camless pick-up with actively driven feed roller for optimum crop flow under all conditions, crop press roller unit and pivoting guide wheels, 55 mm tine distance (working width 2,350 mm according to DIN 11220) (0860)
Knotter cleaning with compressed air (on-board compressor / with hydr.brakes) included (1030)

Enquiry

In order to assist us in reducing spam, please type the characters you see:

You may also like